INDUSTRIAL VERTICAL COMPRESSORS

INDUSTRIAL VERTICAL COMPRESSORS

Corken offers a variety of piston rod packing configurations, distance piece options, and special coatings suitable for a wide range of industrial gases. A double packed (D-Style) reciprocating compressor has one distance piece and offers a moderate level of leakage containment. A triple packed (T-Style) compressor has two distance pieces offering the highest level of leakage control. If necessary each distance piece can be pressurized, purged, or vented for maximum leakage containment. Both styles are available in single- and two-stage, air or water cooled, and single and double-acting versions with NPT or Class 300 RF connections.

Standard compressor mountings designed for liquefied gas transfer, vapor recovery, and gas booster applications are available. If one of these do not meet the requirements of the application, Corken can supply a custom engineered package. The ASME B31.3 – 2012 piping option is available upon request. Each product group below is designed for a specific level of leakage containment.

DOUBLE PACKED COMPRESSORS

D-Style oil-free compressors offer two sets of packing per piston rod and one distance piece for moderate leakage containment. Purge kits with all of the accessories needed to purging or pad the distance piece are available.
>> Utilizes two sets of V-ring packing per piston rod and one distance piece
>> Adjustable packing screw on lower packing maximizes sealing performance over the life of the packing
>> Oil-free gas compression (exceptions: models 791 and 891 are not oil free)
>> Typically used in toxic and corrosive applications where oil-free gas is required and moderate leakage containment is desirable

FEATURES

>> All cylinders and heads are made of ductile iron for maximum thermal shock endurance
>> Oil-free gas compression with a moderate level of leakage containment
>> Distance piece eliminates piston rod over travel and provides oil-free gas compression
>> The distance piece can be purged or pressurized for maximum leakage control
>> Valve design offers quiet operation, high efficiency and greater durability
>> The step-cut design of the self-lubricating piston rings provides higher efficiencies during the entire life of the piston ring
>> Positively locked pistons allows end clearance to be precisely set to provide maximum efficiency and long life
>> Packing sets are a spring loaded seal design and self adjusts to compensate for normal wear
>> Adjustable packing screw ensures maximum sealing capacity throughout the life of the packing (exceptions: models 791 and 891)
>> Cast iron crossheads provide superior resistance to corrosion and galling
>> Pressure-lubricated crankcase with filter keeps the internals well lubricated at all times and minimizes premature wear


TRIPLE PACKING COMPRESSORS

The T-style is an oil-free compressor with three sets of packing per piston rod and two distance pieces for maximum leakage control. Purge kits with all of the accessories needed to purge or pad each distance piece are available.
>> Utilizes three sets of V-ring packing per piston rod and two distance pieces
>> Adjustable packing screw on lower packing maximizes sealing performance over the life of the packing
>> Oil-free gas compression
>> Typically used in toxic and corrosive applications where oil-free gas and maximum leakage containment are critical

FEATURES

>> All cylinders and heads are made of ductile iron for maximum thermal shock endurance
>> Oil-free gas compression with the highest level of leakage containment
>> Since the T-Style configuration eliminates rod over travel, you get oil-free gas compression
>> The two distance pieces can be purged or pressurized for maximum leakage control
>> Valve design offers quiet operation, high efficiency and greater durability
>> The step-cut design of the self-lubricating piston rings provides higher efficiencies during the entire life of the piston ring
>> Positively locked pistons allows end clearance to be precisely set to provide maximum efficiency and long life
>> Piston rod seals minimize oil carry over and maximize leakage control
>> Packing sets are a spring loaded seal design that self adjusts to compensate for normal wear
>> Adjustable packing screw ensures maximum sealing capacity throughout the life of the packing (exceptions: models 791 and 891)
>> Cast iron crossheads provide superior resistance to corrosion and galling
>> Pressure-lubricated crankcase with filter keeps the internals well lubricated at all times and minimizes premature wear