AIR AND GAS FILTERS

AIR AND GAS FILTERS

Contaminants take many forms in compressed air and gas systems. Small particles of atmospheric dust not removed by compressor intake filters are concentrated during compression. Pipe scale forms over time by the interior rusting of air lines. Dirt and debris can enter gas lines from the well. Hot running lubricated compressors introduce hydrocarbons when lubricants break down. Over time these contaminants will wear out seals, damage sensitive instruments and pneumatic tools, foul heat exchangers & desiccant beds, and cause costly downtime. Put Van Air Systems filters and elements to work and see the difference that clean, trouble free air and gas make in your system.

AIR FILTERS F200 SERIES

Van Air Systems’ F200 series coalescing and particulate filters are designed to remove contaminants from compressed air systems. Available in ¼” to 3″ NPT connection sizes and flow capacities from 15 to 1200 scfm at 100 psig in 15 housings and 9 filtration grades, the F200 series removes oil aerosols, oil vapors, condensed water, and particulates. F200 housings are made of cast aluminum and coated with an epoxy powder coating for corrosion resistance. All units include push-on elements with a durable polyester drain layer. Accessories include differential pressure indicators, wall mounting kits, connector kits and automatic drain valves.

FEATURES & BENEFITS

>> Flows up to 1250 scfm at 100 PSIG
>> Maximum working pressure, 250 PSIG at 225°F (RD grade element 250 PSIG at 80°F)
>> Heavy-duty cast aluminum design
>> Push-on element for quick servicing
>> Standard pop-up indicator signals when element needs replacing
>> Large reservoirs facilitate draining of coalesced water and liquids
>> Nine filter element grades, 25 micron – .01 micron
>> Remove oil aerosols, oil vapors, liquids, and sub-micron particles
>> Long-lasting elements reduce maintenance costs


AIR FILTERS F101 SERIES

Van Air Systems’ F101 series coalescing and particulate filters are designed to remove contaminants from compressed air systems. Available in 2″ NPT to 6″ flange connection sizes and flow capacities up to 5000 scfm at 100 psig in 6 housings and 10 filtration grades, the F101 series removes oil aerosols, oil vapors, condensed water, and particulates. Housings are constructed of welded steel, built and stamped in accordance with the ASME code. Accessories include differential pressure indicators and automatic drain valves.

FEATURES & BENEFITS

>> Flows up to 5000 scfm at 100 PSIG
>> Standard vessel maximum working pressure, 250 PSIG at 225°F
>> Vessels with maximum working pressures up to 1440 PSIG available
>> ASME welded steel design
>> Push-on element for quick servicing
>> Large reservoirs facilitate draining of coalesced water and liquids
>> 10 filter element grades, 25 micron – .01 micron
>> Remove oil aerosols, oil vapors, liquids, and sub-micron particles
>> Long-lasting elements reduce maintenance costs


AIR FILTERS MIST ELIMINATORS

The Van Air Systems Mist Eliminator is a special purpose coalescing filter for removing large volumes of oil and oil aerosols with a pressure drop of 1 psid or less. Minimizing pressure drop translates directly to energy savings. With a thick bed of glass fiber, the Mist Eliminator element facilitates self-cleaning by continuous draining. Contaminants are trapped at various stages within the fiber bed, not only at the surface. This prevents clogging and keeps pressure drop low.

FEATURES & BENEFITS

>> Removes bulk liquids and oil aerosols from compresses air systems
>> Low pressure drop
>> 10 year element life
>> Protects downstream equipment
>> ASME code stamped housing


AIR FILTERS MOISTURE SEPARATOR

Van Air’s Moisture Separators remove compressor lubricant, oil aerosols, and moisture from compressed Air Systems. These separators have flow capacities up to 800 SCFM at 100 psig and available in 1/2” through 3” connection sizes. The moisture separator housings are made of cast aluminum and they are coated for corrosion resistance. Each Moisture Separator requires no electricity and includes a push-on element cartridge and manual or automatic drain valve.

FEATURES & BENEFITS

>> Lifetime warranty
>> Cyclonic separation technology
>> No electricity required
>> Constructed of non-corrosive materials


AIR & GAS FILTERS FILTER ELEMENTS

Rid your compressed air or gas system of harmful oil aerosols, oil vapors, dirt, and pipe scale with Van Air Systems filter elements. Van Air Systems is the original manufacturer of 10 grades of filter elements for particulate removal, oil aerosol coalescing, and vapor absorbing applications.

FEATURES & BENEFITS

>> Corrosion-resistant end caps for rust prevention and easy identification of element
>> Large opening for minimum pressure drop
>> Inner glass fiber pre-filter/support layer removes larger particles to extend element life and add support, preventing strain on the high efficiency media.
>> High efficiency borosilicate glass fiber layer stops small particles and coalesces oil mists.
>> Chemical-resistant polyester outer drain layer facilitates flow of coalesced oil to element bottom for draining and stands up to synthetic oils.
>> Models 500 scfm and larger also include inner coil for extra strength.
>> Chemical-resistant polyester pre-filter layer removes large particles, extending the life of the high efficiency media etc.


GAS FILTERS GF200 SERIES

Van Air Systems’ GF200 series coalescing and particulate filters are designed to remove contaminants from natural gas systems. Available in ¼” to 3″ NPT connection sizes and flow capacities from 15 to 1600 scfm at 100 psig in 16 housings and 9 filtration grades, the GF200 series removes oil aerosols, oil vapors, condensed water, and particulates. GF200 housings are made of cast aluminum and coated with an epoxy powder coating for corrosion resistance. All units include push-on elements with a durable polyester drain layer. Accessories include differential pressure indicators, wall mounting kits, connector kits and automatic drain valves.

FEATURES & BENEFITS

>> Lifetime warranty
>> Flows up to 2,300 MSCFD at 100 PSIG
>> Maximum pressure of 250 PSIG
>> Push-on element for quick servicing
>> Green to red indicator gauge signals when element needs replacing
>> Long-lasting elements reduce maintenance costs


VIDEOS