PORTABLE SOLUTIONS

PORTABLE SOLUTIONS

Portable compressed air dryers are available to purchase or rent for a wide range of applications. These applications include rental fleets, plant air system back-up, mobile abrasive blasting and painting, pipeline dehydration, and really any compressed air application requiring a -40 pressure dew point. With so many portable dryer options available, it is important to know you are buying or renting the right sized portable dryer, and using the right components such as afterfilters and desiccants, based on the application. Be sure to check out our Buyers Guide for Portable Air Dryers to read more about common features and packages as well as other pertinent information such as warranties and customer support.

COOL PAK

The Cool Pak is an aftercooler/filter combo for portable air compressors that delivers cool filtered compressed air for portable jobs. Each Cool Pak consists of an air-cooled after-cooler with a 12VDC motor, 25 micron air filter/bulk moisture separator with a manual drain. All of this is conveniently packaged on a steel constructed stand, with a rock guard, and protective cord wrap for ease of portability. The Cool Pak reduces the harmful effects of liquid contaminants. The Cool Pak is designed for use with portable 185 CFM compressors whenever a Dry Pak PRO air dryer is not an economic solution.

FEATURES & BENEFITS

>> 50 ft. power cord with clamps
>> 2 prong (2P) and 4 prong (4P) hose couplings are included
>> Ideal for portable 185 CFM diesel compressors
>> Includes a handle and protective cord wrap


DRY PAK PRO

The Dry Pak PRO is a portable compressed air system designed for flows up to 185 SCFM. With no power requirements this system can be used virtually anywhere. This portable skid mounted system consists of a D12 Deliquescent Dryer, F200-265 Filter, aftercooler with air motor, rock guard, and a regulator lubricator. The DryPak 150 is a low cost portable air drying system is perfect for small jobs where portability and dry air matter.

FEATURES & BENEFITS

>> 50 ft. power cord with clamps
>> 2 prong (2P) and 4 prong (4P) hose couplings are included
>> Ideal for portable 185 CFM diesel compressors
>> Includes a handle and protective cord wrap


BLAST PAK PRO

The Blast Pak PRO compressed air system, is a single tower deliquescent drying package with conveniently integrated peripherals that are pre-assembled and welded to a forklift skid, allowing maximum portability for mobile drying applications. These compressed air systems can be easily lifted on the back of a truck or trailer and moved about within a plant or worksite.

The Blast Pak PRO is an ideal solution for mobile blasting contractors. Wet compressed air clogs blasting pots and compromises the quality of the blasted substrate by putting moisture back on the surface. This moisture then flashes to rust, necessitating costly re-work.

With an integrated aftercooler, the Blast Pak PRO first cools hot and wet air discharged from the compressor. Cooling forces a substantial quantity of entrained moisture to condense. But even after exiting the aftercooler, the air is still saturated with vapor (100% relative humidity). Next the compressed air passes through the drying vessel, which contains a specially formulated Van Air desiccant called Dry-O-Lite. This desiccant cuts the humidity of the air roughly in half. Finally, air flows through an after-filter to trap any fine particulate matter suspended in the air flow.

FEATURES & BENEFITS

>> No electricity required, plug-n-play design
>> Two step interior and exterior paint for longer vessel life
>> F200 filter and muffler to eliminate oil residue from air motor
>> Removable aftercooler assembly for ease of repair / replacement
>> 3/4″ Auxiliary air connection before the dryer
>> Lifting lugs and steel forklift skid for portability
>> Tie downs to secure units for transportation
>> Two sight windows for desiccant viewing
>> Free initial fill of DRY-O-LITE desiccant included and shipped separately
>> 15 years prorated warranty on Dryer Pressure vessel (1st 5 years Full 100% warranty)


PREP 40

When mobility and portability are essential, turn to the Van Air Systems Prep 40. The Prep 40 series delivers clean, dry and cool compressed air in one integrated forklift skid package. The package includes an aftercooler, moisture separator, pre- and after-filters, and an HL series heatless dryer.

Prep 40 compressed air dryers have been designed for the rugged demands of the equipment rental industry. Heavy duty structural steel frame work protects key components. The skid is “sled style” allowing it to be easily dragged and pushed about a job site. These dryer skids are as close to plug-n-play as equipment gets. Just hook up compressed air hoses, supply 115v power, and the dryer is ready to begin working.

The Prep 40 will deliver compressed air with a pressure dew point of -40, residual oil content of .008 ppm, and removal of particulates greater than 1 micron. The Prep 40 is ideal for supplying back-up compressed air treatment to a wide range of industrial facilities that have stringent air quality requirements. The Prep 40 is also ideal for meeting air quality standards in pipeline hydrostatic testing, pigging, and dehydration operations.

FEATURES & BENEFITS

>> Completely portable package
>> Pneumatic drain valve included
>> Simple to install
>> Delivers -40°F Dewpoint
>> Lifting lugs and steel forklift skid for portability


VIEDOS