SOLBERG OIL MIST FILTERS

SOLBERG OIL MIST FILTERS

In 1966, Charles H. Solberg Sr. invented a new tubular silencer design for small air compressors. Two years later, Solberg was founded. Since then, our successes have been possible thanks to a creative and dedicated team of professionals, quality product, and most of all, our customers. In the future, we see Solberg as a fully integrated, worldwide network. With state-of-the-art facilities, aggressive R&D and our exceptional team, we will continue to grow as a dominant player in each market we serve. Solbergs’s oil mist eliminators are designed to prevent seal leakage, eliminate oil mist emissions and reduce oil consumption. These units also protect your gearbox, crankcase or oil lubrication system by eliminating pressure build-up in the system. These designs are commonly used on lubricating oil systems for high-speed rotating equipment, like gas turbines, steam turbines, turbo compressors, reciprocating engines and gearboxes. Comply with the latest RICE NESHAP Emission Standards.

EE SERIES : RECIRCULATING OIL MIST FILTER

>> Captures oil fog, mist or aerosol from discharge of oil sealed vacuum pumps
>> Back pressure valve designed to release element at 0.5 bar (7.35 PSI) differential for pump safety
>> Seamless drawn housings
>> Corrosive resistant white powder coat carbon steel
>> EE-PSG925 assemblies come standard in zinc nickel finish
>> 1/8” NPSC oil drain
>> 0.3 micron media; 99.97% efficiency
>> Continuous operating temp: 68°F (20°C) to 180°F (80°C)
>> Mounted vertically


DSV/DEE SERIES : OIL MIST & ODOR FILTERS

The Solberg DSV is an extremely effective vacuum pump discharge filter that offers two stages of filtration to remove both oil mist and undesirable odors from the pump’s exhaust. It offers a compact, straight-through design, with an integrated drain port (DEE Series includes back pressure valve) to easily evacuate any collected contaminates. This innovative two-stage design starts with a proprietary coalescing media that cleans the discharge air by capturing and coalescing oil mist. The oil free air is then directed through an adsorptive activated carbon cartridge to remove any residual vapors or odors. The DSV was designed to be easily disassembled and serviced without the use of tools, allowing for extremely fast filter change-out and minimal downtime.
>> Corrosive resistant white powder coat carbon steel
>> Primary filter captures and coalesces oil entrained in air stream
>> Activated carbon element removes offensive odors generated by the process
>> Convenient access drain port
>> Back pressure valve designed to release pressure at 7.35 psig. (0.5 bar) differential for pump safety (DEE Series)


CV SERIES : STATIC VENT OIL MIST ELIMINATORS

Static Vent Breathers (Crankcase Breathers, Gearbox Breathers, Static Demisters) eliminates oil mist visible emissions vented from gearboxes, crankcases and oil reservoirs while preventing excess pressure.
>> High efficiency fiberglass filter elements: 99.97% removal efficiency for 0.3 µm oil mist
>> Eliminates visible vented oil mist emissions
>> Corrosive resistant powder coat carbon steel
>> Compressor, Turbine, Gearbox, Engine Applications
>> Contact factory for specific flow and sizes
>> Low back pressure filter element design: Pleated and wrapped fiberglass options
>> Vents for Oil Reservoirs, Crankcases, Bearings, Coupling Guards
​>> Temperature (continuous operating) 68°F (20°C) to 180°F (80°C)
>> Extensive flow ranges


CRANKCASE VENTILATION SYSTEM

Crankcase Ventilation Systems capture oil laden emissions (blow-by) from the crankcases of reciprocating engines and gen-sets. Comply with the latest RICE NESHAP Standards.
>> 99.5% efficient at 0.3 micron
>> Full design and conformance documentation
>> Eliminates visible vented oil mist emissions
>> Removes potential health hazards and improves the quality of the environment
>> Maintains required crankcase vacuum/pressure to protect engine seals
>> Protects the turbocharger in closed crankcase scenarios in which emissions are directed to the engine intake
>> Recovers expensive lube oil lost during the venting process, which allows for efficient operation and lower maintenance costs
>> 5-10 ppm estimated oil carryover
>> Extensive flow range available: 10 CFM – 1500 CFM
>> Valve included for crankcase vacuum/pressure control
>> Low back pressure filter element design
>> External drain port for oil recovery
>> Leak tested to 0.5 bar pressure
>> Temperature: -40° F (-40° C) to 170° F (77° C)


CVH SERIES, STATIC VENT BREATHERS

Static Vent Breathers (Crankcase Breathers, Gearbox Breathers, Static Demisters) eliminates visible vented oil mist emissions from oil reservoirs, crankcases, bearings, compressors turbines, gearboxes, and engines.
>> Temperature (continuous operating) 68° F ( 20° C) to 180° F (80° C)
>> Extensive flow ranges
>> Eliminates visible vented oil mist emissions
>> Corrosion resistant carbon steel construction
>> High efficiency fiberglass filter elements: 99.97% removal efficiency for 0.3 µm oil mist
>> Vents for Oil Reservoirs, Crankcases, Bearings, Coupling Guards
>> Compressor, Turbine, Gearbox, Engine Applications
>> Powder coat finish
>> Low back pressure filter element design: Pleated and wrapped fiberglass options
>> Contact factory for specific flow and sizes


EF SERIES : SMALL VACUUM PUMP OIL MIST FILTER

>> Captures oil fog, mist or aerosol from discharge of oil sealed vacuum pumps
>> Steel construction with nickel plated finish
>> Seamless drawn housings
>> Easy thumb screw access for element maintenance
>> Oil run-off from the filter returns to the pump
>> 0.3 micron media; 99.97% efficiency
>> Continuous operating temp: 68°F (20°C) to 180°F (80°C)


EFDB SERIES W/AUTO-DRAIN

Compact Oil Mist Discharge Eliminator with Auto-Drain Back System, ISO Flange, Fine Thread.
>> Temperature (continuous operating) 68° F ( 20° C) to 180° F (80° C)
>> Steel construction with nickel plated finish
>> Easy thumbscrew access for maintenance
>> Seamless drawn housings
>> Auto Drain Back Design for recycling of oil mist-An internal drain returns oil back into pump-Prevents oil blow back with auto sealing
>> Captures oil fog, mist or aerosol from exhaust of oil sealed vacuum pumps
>> Auto Drain Back Design for recycling of oil mist: Enclosed housing allows clean environment
>> Oil run off from the filter returns to the pump
>> 0.3 micron media, 99.97% efficiency


HDL SERIES : INDUSTRIAL OIL MIST FILTERS

The HDL series removes oil mist and aerosols from the discharge of vacuum pumps. Rugged construction, coalescing media options, and Solberg technology make the HDL a proven solution to safeguard work areas from environmentally hazardous oil mist and smoke.
>> Captures oil fog, mist or aerosol from exhaust of oil sealed vacuum pumps
>> Waste oil can be recycled
>> Pleated filter element provides increased surface area for low back pressure separation of ultra-fine oil mists
>> Seamless drawn housings (1″-2.5″ connections)
>> O-ring sealed housings
>> Corrosive resistant white powder coat carbon steel
>> Discharge baffle (1″-2.5″ connections)
>> 1/4” NPSC drain tap


EFS SERIES : COMPACT DISCHARGE FILTER SILENCER

>> Compact design combines both filtration efficiency and noise reduction
>> Integrated inlet diffuser optimizes sound attenuation
>> Multi-stage noise reducing features including final stage sound absorbent insert
>> Tubular silencing design – tube is positioned to maximize attenuation and air flow while minimizing pressure drop
>> Patented high grade element with built-in Butterfly gasket seal which creates positive seal between housing hemispheres and a new seal with each element
>> Seamless drawn housings
>> Corrosive resistant black powder coat carbon steel
>> Ability to mount vertically, horizontally
>> Polyester: 99%+ removal efficiency to 25 micron
>> Temp (continuous): min -15°F (-26°C) max 220°F (104°C)


VIDEOS