Kinney offers many standard vacuum pump systems with an almost endless amount of optional accessories. Accessories for vacuum pump systems can include any combination of dry screw vacuum pumps, liquid ring vacuum pumps, vacuum boosters, electric motors, direct or V-belt drive, coolant recirculation systems, instrumentation, controls, skid piping, and valves. Kinney application engineers are ready to help you select the best system and combinations of components for your specific needs.
ACRP LIQUID RING VACUUM PUMP SYSTEMS
ACRP Liquid Ring Vacuum Systems are self-contained with recirculating liquid, liquid to air heat exchanger, and instrumentation. ACRP Liquid Ring Vacuum Systems are fully assembled with all required system piping, and are fully tested prior to shipment. These air-cooled and self-contained vacuum systems require no make-up sealant or cooling water.
FEATURES
>> Kinney KLRC Compound Liquid Ring Vacuum Pump with mechanical seals
>> Liquid to air heat exchanger
>> Flow range: 20 – 1000 CFM (35 – 1700 m³/h)
>> Vacuum levels to 29.5 Hg (-100 kPa g)
>> Steel exhaust separator tank
>> Discharge liquid mist eliminator with drain valve and return line
>> Seal fluid instrumentation package including:
>> Seal line thermometer
>> Seal line valving
>> Compound vacuum/pressure gauge
>> Quiet, vibration-free operation
>> Many optional accessories available
APPLICATIONS
>> Chemical & Pharmaceutical Processing
>> Deaeration
>> Extruders
>> Filtration
>> Solvent Distillation/Vapor Recovery
>> Degasifiers
>> Dehydration Evaporators
>> Vacuum Chilling
CB COMPACT VACUUM SYSTEMS
Kinney® CB Compact Booster Systems combine the features of Kinney KT™ Pumps and Integral Drive (C-face) Boosters.
FEATURES
>> High pumping capacity
>> Compact envelope
>> Quiet, vibration-free
>> Water-cooled for low operating temperature
>> Tough, durable pumps
APPLICATIONS
>> Vacuum Packaging
>> Vacuum Furnaces
>> Vacuum Coating
>> Sputtering
>> Space Simulation
CBV COMPACT BOOSTER VARIABLE SYSTEMS
Kinney CBV Compact Booster Variable Systems combine the features of Kinney KT pumps and vacuum boosters with VSM Technology into a space efficient package capable of continuous, high pumping capacity to 10 microns.
FEATURES
>> High pumping capacity starting from atmospheric pressure
>> VSM booster motor VFD tuned and programmed by Tuthill
>> VSM motor eliminates vacuum booster wind-milling
>> Reduces vacuum pump down cycle time by 30-40% depending on chamber volume
>> No unique bypass booster needed
>> No vacuum switch required to start booster
APPLICATIONS
>> Vacuum Furnaces
>> Vacuum Coating
>> Sputtering
>> Space Simulation
CC CLOSE-COUPLED VACUUM SYSTEMS
Kinney CC Close-Coupled Mechanical Booster Vacuum Pump Systems are designed to provide very fast pumpdown and high pumping speed.
FEATURES
>> Very fast pumpdown for short cycles
>> High pumping speed over a wide pressure range
>> Single motor and control operates both pumps
>> Both pumps start at atmosphere – no pressure switch or bypass manifold required
>> Low ultimate pressure capability of 0.2 micron
>> Very low vibration characteristics
>> Compact, simple assembly with minimum floor area required
>> Optional internal mechanical shaft seals for booster, for applications where seconds count in cycle and pumpdown time
APPLICATIONS
>> Vacuum Packaging
>> Vacuum Furnaces
>> Vacuum Coating
>> Sputtering
>> Space Simulation